I would like to request for TP-Link to make a VIGI app compatible for the ANDROIDTV operating system. It would help your sales for the VIGI products to have as many client hardware compatible with...

@Virgo it does have a web UI since I was able to access it when I initially configured the C340-W, then i installed in the location where i wanted the camera to monitor. I just want to access that...

ISP > Archer AX50 > TP-Link TL-SG1008 switch > VIGI NVR1016H firmware 210825 connected to switch > TP-Link CPE220 v3 (AP mode) using the POE adapter connected to switch Win10 PC wirelessly connected...

@cgwhaler its normal not to see the 5Ghz frequency when you turn on SMART CONNECT since it combines the SSiD or network name to just one name, usually the name of the 2.4Ghz network and the router...

@cgwhaler is it happening on both the 2.4Ghz and 5Ghz frequencies ? or do you have SMART CONNECT turned ON ? if you have SMART CONNECT turned ON, turn it OFF and connect to either 2.4Ghz or 5Ghz SSiD...

@Tamas71 your computer not getting online when directly connected to the modem could be a clue, it might mean that you have to register the mac address of the device (in this case the PC) to the ISP...