ByteguyLV3Online
Following: 0Followers: 0
Forums/ Controllers
2022-03-18 17:33:19
Re:Isolated EAPs showing up occasionally
@Byteguy I can run a signal strength test, but the APs cannot be moved. If the signal strength is low, why is it that most of the time there is no problem. Seems to be intermittant. APs are really...
0HELPFULS
Forums/ Controllers
2022-03-17 18:57:12
Isolated EAPs showing up occasionally
In the mesh network, I have a controller and 8 APs. From time to time, the log shows that one or more EAPs are isolated. I am wondering if I can somehow find exactly what might be causing that. The...
0HELPFULS
Forums/ WiFi
2022-03-05 22:53:15
Re:EAP225 outdoor--resetting an individual AP
@Somnus Just to let you know, I went onsite yesterday and fixed the problem by logging onto the network after setting my IP on the PC to match the network that the AP had. As soon as I logged on it...
0HELPFULS
Forums/ WiFi
2022-02-28 14:49:45
Re:EAP225 outdoor--resetting an individual AP
@Somnus For this I probably have to go onsite. Setting my computer to a static IP would no doubt knock me off my own internet connection.
0HELPFULS
Forums/ WiFi
2022-02-28 14:47:57
Re:EAP225 outdoor--resetting an individual AP
@Somnus You're right. All I get is a message confirming the MAC address and the model/firmware and how many days of uptime there are.
0HELPFULS
Forums/ WiFi
2022-02-26 17:13:26
EAP225 outdoor--resetting an individual AP
After I finished all the firmware upgrades on both the controller and the APs, I had to reconfigure everything. Yesterday, I remembered that I was going to assign IPs to each AP rather than use DHCP....
0HELPFULS
123...