@Dinosaur1946 It's your router that's assigning the device a new IP - look in your router's DHCP setting for a way to reserve IPs by MAC. Or you might be able to change the microcontroller code to...

@Hvdl I have an HS100/HS110 which runs their schedules on board - I'm not sure about the P100 but I'd guess the same - if you can't try it you'll need to wait for TP Link support to answer. Sounds...

TP Link will need to answer with details, but one thing to keep in mind is that if there's a power outage while you're away the router will be off and you won't be able to reach the P100 to turn it...

The wire in the hole was connected to the wire on the screw it was beside. Those two are line, wire them together with to the black from the kasa switch. The other is load out and should be wired to...

3rd party app - if you have an old android device you can run AutomationManager on it as a local server. It can be configured to post a power usage log to your google drive account as a spread sheet....

If the HS110 can measure power as reported in the original post it sounds like an APP problem rather than a hardware problem. I've just had a look at my V1 HS110 in the app and it too will show...