@dpsguard, yes, it run on the router. I'm not familiar with Mikrotik, but I know that OpenWrt has various Captive Portals packages. However, customization also requires writing software and this can...

@dpsguard, unfortunately I don't have any sample code for an External Server portal except the sample code in the TP-Link FAQ. We don't use the Omada portal at all; our own proprietary Captive Portal...

BearGFR wrote This same document, scenario 6, shows using the CPE in client router mode to establish a connect to an ISP (WISP). You cannot compare your application scenario with that of a WISP. A...

BearGFR wrote My existing WiFi network at the house is served by a Ubiquiti AP, mounted outdoors with an omni-directional antenna, which has been working reasonably well for years. I also use a...

mutebnaser wrote 1-cpe710 is sender .. 2-cpe710 is recive .. 3-cpe710 is recive .. All three CPEs are always alternately sending (one after another) and receiving, otherwise you couldn't exchange...

ReneT wrote Port1: VLAN 1 Untagged, PVID1 -> Fritzbox Port 1 LAN Port2: VLAN 3 Untagged, PVID3 -> Fritzbox Port 4 GAST Ja, so ist das richtig. Intern verteilt die FritzBox das LAN- und das GAST-Netz...