@Raeggan, yes, you could use two CPE510 to create a wireless bridge to an EAP110-Outdoor wired to the LAN port of the remote CPE510. Use operation modes »AP« for one CPE and »Client« for the other...

@dpsguard, did you try with OC200 or with SW controller?

@dpsguard, I think those recommendations are derived from the EAP's antenna radiation patterns. Antenna radiation patterns do not depend on power levels or client devices. If the Tx power is high,...

@dpsguard, did you check »Alert Emails« on the »Settings → Site« page? The User Guide can be so helpful sometimes ...

totin1227 wrote 1. The ISP router LAN4 going to port 1 of the VLAN switch is the only source of internet No, it's a LAN (source of Internet is the WAN). Let's call this LAN network LAN4. From a...

Here a short report from the category »Theory meets Reality«: Customer moves into a newly built building, 20 rooms, 20 EAPs. Electrician runs cables from patch panel in server room to each of the 20...