I had trouble getting this to work with 2.4.7, but found an alternate solution. While it's not running as a service per se (and thus may be more difficult to monitor and restart on failure), if...

Oddly, I just looked at the box for my EAP245 and that claims "802.3at" right on the front. I'm now more confused than ever... but my 802.3af injector seems to be running it just fine on a ~50ft...

Personally I am enjoying the performance of my EAP245, but the EAP220 should suit most peoples' needs just fine and I'd hazard a guess that unless you're doing a lot of LAN-to-LAN streaming (e.g....

It is possible to change the certificate on the EAP Controller, just not easy. Generate your own key and CSR, get a valid/publicly-recognized cert, compile the key and cert into a PKCS#12 file with a...

I'm fairly certain you can't tweak the SSL/TLS settings on these units. You're better off managing your network so that access to the AP is restricted in the first place (e.g. use VLANs). It can't...

I do think it would be good to configure this on a per-AP basis, but in the meantime are you aware of the system-wide LED setting? If you go Settings > System > LED you can turn off the LEDs for all...