mstampLV1Online
Following: 0Followers: 0
Forums/ Switches
2024-01-29 09:40:04
Re:Omada Controller Offloading Static Routing to Switches
@mstamp
0HELPFULS
Forums/ Switches
2024-01-29 09:39:47
Re:Omada Controller Offloading Static Routing to Switches
@Clive_A Switch Routing Table Currently from 192.168.0.21, I can only ping the switch VLAN static address 192.168.11.3 and not the work laptop at 192.168.11.200
0HELPFULS
Forums/ Switches
2024-01-29 09:31:12
Re:Omada Controller Offloading Static Routing to Switches
@Clive_A Gateway Routing Table.below. I noticed the next hope for every VLAN is 0.0.0.0 instead of the default gateway i.e. VLAN11 dynamic route should be destination -192.168.11.0/24/ Next hop...
0HELPFULS
Forums/ Switches
2024-01-29 09:16:18
Re:Omada Controller Offloading Static Routing to Switches
@Clive_A Thanks for the reply, but static routing is not working. Omada Controller 5.13.23 (Windows 11) Devices Below I'm aware for swtich the static routes can be added through the config and...
0HELPFULS
Forums/ Requests & Suggestions
2024-01-29 08:39:26
Re:Omada Contoller Client based Time Range Profiles
@Hank21 , thank you I have created an ACL and will test it tonight. Unfortunately, you can only use a time range for when the ACL rule is "ENABLED" and can only have a time range per day if using...
0HELPFULS
Forums/ Switches
2024-01-26 04:29:35
Omada Controller Offloading Static Routing to Switches
Enabling IPv4 Static Routing in compatible switches to reducing unnecessary traffic routed through routers and increase bandwidth to 10Gbit port capabilities, Currently I have an ER707-m2 router with...
1HELPFULS