Forums/
Pharos Wireless Bridges
2017-01-31 21:55:42
Johnsontp wrote CPE210 mode client IP Static 192.168.0.50 Gateway 192.168.0.1 Connect the cable to the WAN port Archer mode router LAN IP 192.168.100.100 DHCP 192.168.100.101 - 192.168.100.130 Adress...
0HELPFULS
Forums/
Pharos Wireless Bridges
2017-01-31 19:16:54
Get it work! Connecting the CPE to Archers WAN port (instead LAN Port) and configure Archer WAN Port like this: Static IP: 198.168.0.49 Gateway: 192.168.0.1 It works fine! Only 1 Problem left: If I...
0HELPFULS
Forums/
Pharos Wireless Bridges
2017-01-31 17:35:07
why and how should/can I split it? WNR3500 IP: 192.168.0.1 DHCP ON, Range: 192.168.0.2 - 192.168.0.50 CPE: IP: 192.168.0.50 Gateway 192.168.0.1 Archer IP:192.168.100.100 DHCP ON, Range:...
0HELPFULS
Forums/
Pharos Wireless Bridges
2017-01-31 16:18:32
:rolleyes: omg. now it works. I thank you so much!!!!! My configuration: WNR3500 IP 192.168.0.1 DHCP ON, Range: 192.168.0.2 - 192.168.0.50 CPE IP: 192.168.0.50 DHCP OFF, Gateway: 192.168.0.1 Archer...
0HELPFULS
Forums/
Pharos Wireless Bridges
2017-01-31 15:51:53
WNR3500 DHCP Range: 192.168.0.1 - 192.168.0.254 so CPE IP is in the range since the beginning
0HELPFULS
Forums/
Pharos Wireless Bridges
2017-01-31 14:57:02
Wrong gateway in DHCP settings. Your gateway is 192.168.0.1. DHCP on CPE must be off. DHCP on Archer in router mode must be on. Archer's LAN and PCs are in a different subnet then. The CPE and its...
0HELPFULS