GregVLANLV1Online
Following: 0Followers: 0
Forums/ WiFi
2023-08-18 17:38:21
Re:EAP670 - Do I Need 2.5GB Backhaul?
@Virgo If I have all three APs wired directly to the 2.5GB ports on the switch, does that provide more "breathing room" than if two (or three) APs are sharing a 1GB trunk? Even with 50 typical office...
0HELPFULS
Forums/ WiFi
2023-08-17 18:27:12
Re:EAP670 - What POE Wattage Required from Switch?
@Philbert @Virgo Thanks for the confirmation. I thought that Maximum Power Consumption was the magic number I needed to hit - but wanted to be sure as I set about selecting switches for this LAN. I...
0HELPFULS
Forums/ WiFi
2023-08-17 18:25:37
EAP670 - Do I Need 2.5GB Backhaul?
Specifying-out a new SMB LAN initially deploying three EAP670s. We expect an average of 15-20 active Wi-Fi connections per AP with bursts up to 50 during office hours. Traffic is a mix of Citrix VPN,...
0HELPFULS
Forums/ WiFi
2023-08-17 00:46:30
EAP670 - What POE Wattage Required from Switch?
I am planning a new VLAN network and will be deploying 3 - EAP670 APs. These three will have nearby electrical outlets but I may add two more that would need to use POE power. The EAP670...
0HELPFULS
Forums/ WiFi
2023-08-14 21:26:41
Re:EAP670 Speeds Below Expectations
@KimcheeGUN Thank you for the reply and the straight talk. It's the Mack truck effect I am after: VLANs so I can separate out IoT devices, a more robust guest network, L2+ management, and the ability...
2HELPFULS
Forums/ WiFi
2023-08-13 17:31:55
Re:EAP670 Speeds Below Expectations
@KimcheeGUN @Virgo Thank you for the help. Following is the LAN topology: Firewalla switch -- Asus XT8 Mesh AP -- Asus XT8 Mesh Node (1 floor down, about 100 feet away) - ethernet backhaul @ 1.0Gbps...
0HELPFULS