@AftabIN ER605 V1 hardware is already end-of-life and will receive no firmware updates. As to I also want to know that in v2 can we plug different adapters in its usb port like 1- usb to lan adapter...

@Wayne-TP Thanks for the reply. As I said , I dont recall setting a specific detection area when I initially setup the D230 some months ago. That, I assume, would mean that the detection area was the...

@Wayne-TP Yes, I do have a D230S1. Everything was working fine prior to the firmware update ( on both the D230S1 and the H200 Hub ). I have the D230 set up for person and motion detection and local...

@TapoD230 I had a similar problem after the firmware update. Just got around to investigating. I found I had to redefine a Detection Zone, in the Doorbell Detection settings. Don't remember setting...

@Larry_C-84 Can you post the details of your WAN configuration on the ER605 please

@FarNorth Have you tried using the broadcast address for the remote subnet in the WOL request. In this case 10.1.1.255. AFAIK that should enable the packet to be sent as Unicast and to be routed...