And secondly create a profile with a non-tagged network and the voip network as tagged and "voip"-enabled, correct? so far so good. I also have found out why I did not get an IP in the phone. I had a...

Hi I am currentry tying to setup a dedicated voice network. I have an ER605 router, two SG2008P switches and one Gigaset Go-Box 100 connected to one of the switch ports. I also have set a dedicated...

@dsj Did you also set DNS etc? NTP usually is set by FQDN, not by IP. And the WAN up and down was from your setup or instability? Did you also set the default gateway? What does traceroute say?

@dsj It seems your "Modem" is a router itself and you run Double-NAT (without knowing). Try setting the WAN address of the 605 as static to 192.168.0.10/24, GW 192.168.0.1 and don't get the settings...

Hi @HanSlo I have found out what it was, at least in my setup. I have chosen to block communication between VLANs on network/VLAN level on switch level and the iPad seem to do a lot of Multicast....

Hi Virgo there is non alike. I have no ACL set for the EAP and no ACL that pertains the Clients in the switches. Strangely logging out and in of the clients stoped the spamming in the logs without...