Hi @Vincent-TP There are no Vlans on the EAPs and Router. Only at the switch. There was connectivity issues yesterday morning and I narrowed it down to being caused by DFS so I have disabled all the...

I have deployed 4 EAP683 UR in an office environment and have noticed that all the APs report Rx dropped packets and sometimes Rx errors on LAN. Only 5Ghz channel is enabled on all APs as 2.4Ghz...

I'm trying to figure out how come I can't seem to add a switch ACL rule. I have 4 active ACL rules and when I try to turn on the 1st rule, I get the message - IP-Port Group cannot be applied in...

@Fae Hello and sorry for the late reply. As a network installer, the first rule of thumb is to eliminate and narrow down the root cause of potential issues, which I did and informed your colleagues...

@Fae Just a quick update, TP Link Malaysia sent me an offline copy of Firmware 1.0.2 on Sept 21. I successfully applied the firmware update today, Sept 22 on both theL1 APs, bringing all 10 APs in...

@BravoMike31 I'm facing the same exact situation for a new network setup. I've deployed an entire Omada setup (10 - EAP620HDs, 4 - TL-SG2210MP, ER605 V2 router and OC200 controller) for a 4 storey...