DHCP = Start 192.168.0.150... end 192.168.0.200 CPE IP = out of 192.168.0.150 to 192.168.0.200.... Maybe have minor to 192.168.0.150 or high 192.168.0.250... an not have the ip main router...

Must deal with the 210 without DHCP (off) ..., all ip address management should make them the main router ... By the way, I do not know the ip gateway of the modem that it uses ... but the cpe must...

There are many factors that influence the quality / stability of a wireless link ... starting from the basic alignment, LoS, Fresnel, Electromagnetic noise, distance / power settings, type / length...

Should see the capacity of the connection, ie how many db has, ideally 30dB, up to 20dB is optimal signal to establish a decent connection ... Now must consider the electromagnetic noise factor that...

MaxStream is a proprietary protocol of TP-LINK used to work in environments with excessive noise, and helps to immunize the interference caused by other signals in the environment ... and ensures the...

What I mention is strange ... but I would not be surprised by the working mode in which the CPE is configured ... Client mode, each device will be masked with the mac address of the CPE, so in the...