Has anyone noticed that the erase button is not in the log section? I am getting alarms that my log is maxed out and I have over 10K in log entries but I cannot find the button that used to do an...

@modebm 192.168.1.x is a non routable IP address so your answer would be LAN address.

@ThorstenStr that is an interesting observation! I have also found that even though you upgrade the firmware and let the device do a typical reboot, sometimes you have to power down the device or...

@DannyZ a few of us had a similar issue with the 605 release 1.2.1 and TP came out with a minor release to resolve that back when I was running 5.5.7 I am running 5.6.4 on the OC200 and still running...

@lukass2000 if you disable the loopback protection you risk storming the network and taking it down so you cant do anything. The loopback detect at least will shut down the port, stop the storm and...

@lukass2000 As you can see, if you set it up for loopback, it will detect a loop and shut down the port. When using RSTP it will look to see which path to keep active and which path to block so that...