@AusDread Not sure the issue, maybe the firmware problem? However, once you created the VLAN interface, the switch will be able to do routing between these two VLANs, that's why you can ping...

@MSKAIRON What is the distance between your EAP units? The recommended coverage radius of each indoor EAP is about 15m. If you put them too close they will interfere with each other. Try change the...

@GurkanKaragoz Make sure you can receive an ER605 V2. Many people are asking for ER605 V1 firmware update, although ER605 V2 and ER7206 already received the update more than one month..

@ducky328 Try reset the EAP; Check your controller Settings->Wireless Network->WLAN, make sure you have SSID created in this list. And you may need to disable anti-virus/firewall on your PC. Status...

@Liuck1975 Check your server IP and gateway settings, make sure it is using the new router as the gateway. Go to What's my IP and check if it shows the same IP as your ER7206 WAN IP.

@ChristianB79 On the router, did you choose "Full Mode"? Are you able to Ping 8.8.8.8 on the laptop? Not sure the issue, but maybe you just need to set up a public DNS server on the VPN settings...