@Anh_Alan22 Possible reasons: 1. WiFi cannot provide a stable environment for Controller to broadcast and discover the EAP 2. Your WiFi is distributing different IPs to EAP and your computer. Omada...

@iAsk For the QOS, you can refer to the User Guide. BSS Minrate, nope. Don't see this in the UG. I think that is Rate Limit? You can check out the rate limit on the AP. It's on pages 70 and 71. For...

@dsj Could be that you mess it up. Something not right on your router that stops/blocks you from that. I helped some people with their port forwarding. I only check the port forwarding part and I...

@lacrimal Choose the right WAN where you egress. Internal IP is your device IP, better to make it static. And make sure it is set to static before you open it up. Internal Port is the port that your...

@Aviator14 First things first, you need to make sure that your modem is on bridge mode. If your modem from the ISP is a router, you gotta configure the IPTV on your modem router and you use that to...

@clangren What's the VLAN for your main network? I assume that is VLAN 1? If you get an IP from the main network, the Controller is in the network as well, ER605 should be discovered because the...