grigori.rangelov wrote Yes, i checked CLI and User guides. The instructions in CLI guide in section 1.1 Accessing the CLI is to just connect to the switch over telnet. On my switch the port is...

sleipneer wrote Then I tried the option "port trunking", to bind the SG1016DE with 4 Channels on my Router (AVM Fritz!Box 6360). I set the options in the switch, create the trunk on the first 4...

I do not know of this is the correct ip adres but is there a possibility to change this somewhere? Hi, alfred 1. Reset the switch configuration: With the switch powered on, press RESET button on a...

Twyk General Service wrote [COLOR=#000000]SONOS network-attached speakers use 802.1d (STP) to detect and resolve mesh-network loops. Does the TL-SG1005D support 802.1d? Hi There is no information...

oymd wrote I did the same using an old Win XP laptop, and it also comes up as "USBSer!" in DEVICE MANAGER with a question mark beside it, so obviously not installed properly? Hi, oymd If you see the...

AlanMAC wrote I'd like to know if it will ever be possible to change the port when setting up to send logs to a remote syslog server. Hi, AlanMAC It is impossible.