@Kris0x0000 Yes, it does. Works great here. 1. Have you configured the VLAN at the port you are using to access the switch and set the IPs correctly? 2: Are there any ACLs configured?

@graham-b Sorry having to tell you, but your drawing on page 2 is not going to work. 1. You should put all of the cameras and the NVR into the same VLAN (VLAN 2 in your case). In your drawing the NVR...

@livia48 This actually should work as described. I have a similar setup working here with an SG3428X, so I guess, there might probably be a VLAN misconfiguration. A first step could be to set the...

@acyhn I assume you have setup VLAN 1, 100 and 200. In the VLAN list, click edit VLAN1. Select Ports 1 to 11 and 16 to 20 as untagged member of VLAN1 In the VLAN list, click edit VLAN 100. Select...

Hi. I tested the L3-features of the SG3428X and found, that VLAN-routing only works with standard frames. The L3 interface details show an MTU of 1500, so it's no suprise that jumbo frames are...

@Virgo Yes, you are right. Exactly one PVID must be set. The question is, which one. One of the VLAN IDs of the WLANs, the VLAN ID of the Management VLAN or a VLAN ID which is actually not used by...