@Fae Hi Fae, thanks for replying :-) Components; 1 x OC200 1.0, 1.9.1 Build 20210721 Rel.39263 1 x TL-SG2428P v1.0, 1.1.2 Build 20210806 Rel.55686 2 x TL-SG2008P v1.0, 1.0.2 Build 20210806 Rel.55686...

I have a link between two switches (TL-SG2428P <-> TL-SG2008P) where the Uplink/Downlink labels on the connecting ports are the wrong way round, any way to correct this ? No idea what this will do to...

The problem here is the controller has mis-labeled the uplink and downlink between SW3 and SW1, i.e. they are reversed., . Any way to manually change this ?, and then also mark the correct port on...

Controller Version: 4.4.4 Model: OC200 1.0 Firmware Version: 1.9.1 Build 20210721 Rel.39263 Since moving the controller to a separate subnet (using DNS option 138 for discovery), the network topology...

@Fae @Fae Hi, no, thats not the case, all AP's have clients connected. The chart is still not showing any data for AP4 which has 4 clients connected.

OK, so I can enable IGMP snnopin on a VLAN via Administration -> Wired Networks -> LAN where all the VLANs and the default LAN are listed. Next to each entry for the VLANs is an edit button which...