@Tatogonne In Router mode Main Deco runs under heavier load than in Access Point mode. If you have many devices connected to your WiFi mesh, 30-40 and up, changing Deco mode could make a difference....

@Tatogonne I can give you recommendations for powerline adapters. It is rather simple: connect one powerline adapter with Ethernet cable to free Ethernet port of Main Deco, connect second powerline...

@Dandalorian You can also try these things, all together: 1. Turn off 2.4GHz in Deco Main Network, to ensure laptop always uses faster and less congested 5GHz: 2. Find approximate middle point...

@tuli You should be able to do that, with Deco mesh running in Access Point mode. This is how I have it in my house. In very rare case, router may not support Deco Ethernet backhaul, but most do.

@ianreneb i would start with placing Satellite M9 Plus in the living room next to TV/virgin box, and hardwire them to Satellite Deco M9. If Satellite has good link to Main Deco from there, you'll...

@Miles80 When you run Deco mesh in Access Point mode, these options (LAN IP, DHCP Server, Address Reservation) are on ISP router, not in Deco app. You should have access to configuration Web pages of...