@Malco You can buy regular 5-port gigabit switch, connect it to master Deco P9 available Ethernet port and have 4 remaining switch ports to connect devices to. TP-Link brand of switch is recommended,...

@GyanAccessFreak I would not recommend XE75. It has many complains on that forum, more than any other Deco model. If I to choose between X60 and X50/X55, my choice would be X50/X55. If choosing...

@Mattjtemp I would suggest different approach. Keep Deco mesh in Access Point mode. Rewire Deco the following way: In Access Point mode, you do not need Main Deco between the switch and modem/router....

GyanAccessFreak wrote @Alexandre. X50: Has 2 ports. 1 POE in and 1 out for wired daisy chain another X50. However I still need to power up both in the X50 in the daisy chain. @GyanAccessFreak This is...

@valiant3600 Well, we tried. There is nothing else that can be done. Dual band (2.4GHz and 5GHz under same SSID) could cause troubles. I have old smart thermostat, it can't handle dual band. Fast...

@Octavia53 Thanks, that's the right one. It appears, all you need to do is connect Main Deco with Ethernet cable to 'Power hub' and Deco mesh should work. To make sure Main Deco understands the...