Business Community > All Threads > EAP Controller shows no EAP110 in remote locations
< All Threads

EAP Controller shows no EAP110 in remote locations

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP Controller shows no EAP110 in remote locations

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP Controller shows no EAP110 in remote locations
EAP Controller shows no EAP110 in remote locations
2017-08-03 15:56:15
Model :

Hardware Version :

Firmware Version :

ISP :

Model : EAP110

Hardware Version :

Firmware Version : 1.0.2 Build 20160405 Rel. 51328

ISP :

We have installed a EAP Controller in the main office with 5 running APs EAP110. Works fine.
In two remote offices are also EAP110 installed - but we can manage/see them through the EAP Controller software in the main office. Access via http(s) to the remote EAP is possible, the network is routed, no ports are restricted.

How is it possible to add remote APs to the EAP controller?
  0      
 
  0      
 
#1
Options
5 Reply
Re:EAP Controller shows no EAP110 in remote locations
2017-08-03 17:38:15

mprell wrote


How is it possible to add remote APs to the EAP controller?


Use the EAP Discovery tool to adopt the remote EAPs (see the EAP support page for the EAP Discovery tool).
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:EAP Controller shows no EAP110 in remote locations
2017-08-06 19:15:19
If the EAPs are already in the pending list, then it means they have already been found by EAP controller, you can adopt them directly for management;

If not, then you can use either discover utility or DHCP option138 to make the EAPs to be able to be found by controller at first, then you can adopt them for management, refer to FAQ for details:
Use EAP Discover Utility: http://www.tp-link.com/en/faq-1359.html
Use DHCP Option138: http://www.tp-link.com/en/faq-1360.html
  0  
  0  
#3
Options
Re:EAP Controller shows no EAP110 in remote locations
2017-08-06 22:03:58

xingdeer wrote

If the EAPs are already in the pending list, then it means they have already been found by EAP controller, you can adopt them directly for management;


EAPs can't appear in the pending list of an EAPC if connected over a routed network with a separate broadcast domain.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:EAP Controller shows no EAP110 in remote locations
2017-08-07 10:39:31

R1D2 wrote

EAPs can't appear in the pending list of an EAPC if connected over a routed network with a separate broadcast domain.


Yes, you are correct, while mpell said that
we can manage/see them through the EAP Controller software in the main office
, so I am curious about this, maybe the EAPs are already in the pending list?:D
  0  
  0  
#5
Options
Re:EAP Controller shows no EAP110 in remote locations
2017-08-07 18:00:26
mpell said that routes for unicast traffic are in place:


Access via http(s) to the remote EAP is possible, the network is routed, no ports are restricted.


As long as the local and remote networks are not bridged together, but routed, broadcasts from the EAPs in the remote network are not visible to an EAPC in the local network.

Best is to use the DHCP option 138 as you did wrote. Second-best is manually adopting them using the discovery tool if setting DHCP options is not possible.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1401

Replies: 5

Related Articles
EAP Controller not showing remote EAP110
730 0
HOW TO REMOTE ACCESS TO THE ROUTER FROM OTHER LOCATIONS
656 0
Minimum Rate Limit on EAP 110-outdoor and EAP Controller
4760 0
Resetting EAP 110 (Software controller-adopted)
168 0
EAP110 sem o uso do EAP Controller
994 0
remote access to EAP
264 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.