Business Community > All Threads > CPE210 point to point set up question
< All Threads

CPE210 point to point set up question

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

CPE210 point to point set up question

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 point to point set up question
CPE210 point to point set up question
2017-07-12 02:05:26
Model :

Hardware Version :

Firmware Version :

ISP :

Hi, All:

I am trying to set up 2 CPE210 for point to point configuration and encountered one issue. I am able to set the 1st cpe as AP and the 2nd one as Client and am able to surf internet if I connect the ethernet cable from cpe2 directly to my laptop. Now if I connect the ethernet cable from cpe2 to a linksys Wrt300N wireless router so I can connect multiple devices through that router, I just cannot get internet. My question is:
1. is this right configuration or using client mode, I can only connect 1 device through ethernet cable?
2. if my set up is ok, what kind of configuration should I do on the linksys router? Any configuration change needs to be done on my router1 which cpe1 connects to?

My main router1 is 192.168.1.1 and I've set cpe1 as 192.168.1.200 and cpe2 as 192.168.1.199. Hope can get some help here. Thanks!!

VH
  0      
 
  0      
 
#1
Options
11 Reply
Re:CPE210 point to point set up question
2017-07-13 21:28:18
If you want to use the Linksys router as an AP, connect the client CPE's Ethernet port with one of the Linksys' LAN port, not the WAN (Internet) port. In this case, disable the DHCP server on the Linksys.

If you want to use the Linksys as a router, use the WAN port for connection to the CPE and let the DHCP server on the main router assign an IP/default gateway to the Linksys' WAN. Make sure to change the Linksys LAN from its default, which AFAIK is also 192.168.1.x and enable the DHCP server on the Linksys router.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:CPE210 point to point set up question
2017-07-13 22:51:43

R1D2 wrote

If you want to use the Linksys router as an AP, connect the client CPE's Ethernet port with one of the Linksys' LAN port, not the WAN (Internet) port. In this case, disable the DHCP server on the Linksys.

If you want to use the Linksys as a router, use the WAN port for connection to the CPE and let the DHCP server on the main router assign an IP/default gateway to the Linksys' WAN. Make sure to change the Linksys LAN from its default, which AFAIK is also 192.168.1.x and enable the DHCP server on the Linksys router.


Thanks for your suggestion. I will try it once I get home tonight and report back!!
  0  
  0  
#3
Options
Re:CPE210 point to point set up question
2017-07-14 04:47:27
I don't know what to say, it's been working all day on those settings and I'm getting about 30mbps in the garden.
  0  
  0  
#4
Options
Re:CPE210 point to point set up question
2017-07-14 05:02:26

dougie wrote

I don't know what to say, it's been working all day on those settings and I'm getting about 30mbps in the garden.


Cool. Congratulations!
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options
Re:CPE210 point to point set up question
2017-07-14 17:15:37
Thanks, still working today.
  0  
  0  
#6
Options
Re:CPE210 point to point set up question
2017-07-14 22:26:46
Thanks for the suggestion R1D2 and it worked for me. Just switch the ethernet cable to linksys from WAN to LAN solved the issue. What a life saver!! Many thanks!!! :D:D
  0  
  0  
#7
Options
Re:CPE210 point to point set up question
2017-07-15 03:44:24

vh_hv wrote

Thanks for the suggestion R1D2 and it worked for me. Just switch the ethernet cable to linksys from WAN to LAN solved the issue. What a life saver!! Many thanks!!! :D:D


You are welcome. Please remember to disable the DHCP server on your Linksys device if the main router already provides DHCP.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#8
Options
Re:CPE210 point to point set up question
2017-07-15 06:21:48
:)
  0  
  0  
#9
Options
Re:CPE210 point to point set up question
2017-07-24 16:19:30

R1D2 wrote

If you want to use the Linksys router as an AP, connect the client CPE's Ethernet port with one of the Linksys' LAN port, not the WAN (Internet) port. In this case, disable the DHCP server on the Linksys.


In this case, should I need to change the Linksys LAN from its default, also 192.168.1.x to login its web page more easily?
  0  
  0  
#10
Options
Re:CPE210 point to point set up question
2017-07-24 20:03:14

Ferrarigogo wrote

In this case, should I need to change the Linksys LAN from its default, also 192.168.1.x to login its web page more easily?


is correct...

An IP outside the DHCP range of the main router and other than the IP and gateway of the same to avoid some conflict ...

Regards
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 2779

Replies: 11

Related Articles
CPE210 set up as point to point - intermittent connection at night
472 0
CPE210 network point to point
520 0
Set Point to Point
358 0
Building a network with CPE210 point-point.
2750 0
Outdoor Access Point Set-up
337 0
Point to point connection with tp-link CPE210
1302 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.