AC50 with multiple VLAN's and SSID's using several CAPs
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC50 with multiple VLAN's and SSID's using several CAPs
Model :
Hardware Version :
Firmware Version :
ISP :
Hi,
I want to configure the following example:
Wifi-Controller AC50 and several CAPs 300
WLAN1 with VLAN1 is connected to ethernet port 1 via VLAN1 (for guests)
WLAN2 with VLAN2 is connected to ethernet port 2 via VLAN2 (for employees)
WLAN3 with VLAN3 is connected to ethernet port 3 via VLAN3 (for internal use)
Three different routers are connected to ethernet port 1 to 3
The CAPs are connected to ethernet port 5 via a different switch.
All CAPs have to provide the three WLANs via three different SSIDs at the same time.
I have to guarantee that data of router 1 is only available in WLAN1 etc.
How do I have to configure the AC50 to solve the problem, especially the relation between the ethernet ports, the interfaces and the vlans?
Many thanks
Torsten Theis
Hardware Version :
Firmware Version :
ISP :
Hi,
I want to configure the following example:
Wifi-Controller AC50 and several CAPs 300
WLAN1 with VLAN1 is connected to ethernet port 1 via VLAN1 (for guests)
WLAN2 with VLAN2 is connected to ethernet port 2 via VLAN2 (for employees)
WLAN3 with VLAN3 is connected to ethernet port 3 via VLAN3 (for internal use)
Three different routers are connected to ethernet port 1 to 3
The CAPs are connected to ethernet port 5 via a different switch.
All CAPs have to provide the three WLANs via three different SSIDs at the same time.
I have to guarantee that data of router 1 is only available in WLAN1 etc.
How do I have to configure the AC50 to solve the problem, especially the relation between the ethernet ports, the interfaces and the vlans?
Many thanks
Torsten Theis
