Business Community > All Threads > CPE 210 Client Mode Issues
< All Threads

CPE 210 Client Mode Issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE 210 Client Mode Issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE 210 Client Mode Issues
CPE 210 Client Mode Issues
2017-06-26 00:46:39
Model :

Hardware Version :

Firmware Version :

ISP :

I have my CPE210 configured as a client. Its connected to a switch with four IP cameras. Was working fine until power went out. Now cameras are not discoverable on my home network. The CPE is still connected to the AP, but the cameras cant be seen. I tried configuring the DHCP server on the CPE and reserved IPs for all four cameras. Still nothing.

Thanks
  0      
 
  0      
 
#1
Options
1 Reply
Re:CPE 210 Client Mode Issues
2017-06-27 16:05:34
Why did you configure the DHCP server on the CPE? Disable the DHCP server on AP and Client CPEs are better. You said the CPE is still connected to the AP, so please use your pc to connect to the client CPE210 directly and check if the Internet is fine? If it's ok, it could have something wrong with the settings on the cameras and your home network.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1106

Replies: 1

Related Articles
CPE 210 Client mode no internet
1073 0
CPE-210 does not have internet connection in client mode
2603 0
CPE-210 in AP Client Router mode
1050 0
2 cpe 210. Ap and Client
877 0
CPE 210 low mbps in client
1146 0
Router connected to CPE 210 Client
2027 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.