Business Community > All Threads > Multiple VLANs and DHCP on TL-ER6120
< All Threads

Multiple VLANs and DHCP on TL-ER6120

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Multiple VLANs and DHCP on TL-ER6120

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multiple VLANs and DHCP on TL-ER6120
Multiple VLANs and DHCP on TL-ER6120
2017-03-12 01:50:34 - last edited 2021-04-18 10:58:56
Model :

Hardware Version :

Firmware Version :

ISP :

Good Day,

I have the TL-ER6120, I could use help in creating 2 vlans with DHCP in both, 192.168.2.0/24 and 172.99.100.1/24 can't figure out how to do so, is this supported?
My intention is to have a separate networks for Staff and Guests.


Staff Network: 192.168.2.0/24
DHCP Range: 192.168.2.100 - 199


Guest Network: 172.99.100.0/24
DHCP Range: 172.99.100.100 - 199


Thanks
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Multiple VLANs and DHCP on TL-ER6120-Solution
2020-09-09 01:50:41 - last edited 2021-04-18 10:58:56

Dear @morikd,

 

The instruction below may help you if you want to divide the network into multiple subnets.

How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches?

 

For more features about the TL-ER6120 router, you could get the User Guide from the link below.

https://www.tp-link.com/support/download/tl-er6120/

 

Hope the info above helps.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:Multiple VLANs and DHCP on TL-ER6120
2017-03-13 05:55:56 - last edited 2021-04-18 10:58:56
You will need a L3 managed switch to fully use VLANs this way. See the application example for setting up VLANs in the TL-ER6120 manual.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Multiple VLANs and DHCP on TL-ER6120
2020-09-08 19:24:59 - last edited 2021-04-18 10:58:56

@R1D2 

 

would you mind to refere with doc are you talking about? or section.

  0  
  0  
#3
Options
Re:Multiple VLANs and DHCP on TL-ER6120-Solution
2020-09-09 01:50:41 - last edited 2021-04-18 10:58:56

Dear @morikd,

 

The instruction below may help you if you want to divide the network into multiple subnets.

How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches?

 

For more features about the TL-ER6120 router, you could get the User Guide from the link below.

https://www.tp-link.com/support/download/tl-er6120/

 

Hope the info above helps.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 3658

Replies: 3

Related Articles
Route internet traffic to Multiple VLANs with Multiple DHCP pools on a TL-SG2008P
2681 0
TL-SG2008P Bottleneck using multiple VLANS & multiple DHCP pools with router ?
1003 0
DHCP on VLANs ports TP-LINK TL-ER6120
878 0
DHCP Server & Relay with multiple VLANs
794 0
Multiple VLANS
263 0
TL ER6120 DHCP DNS issue
509 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.