Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I am using a TL-SF1008 with two Axis cameras at the PoE ports. One cam uses maximum 12,8 W, the other 3,0 W max which is well below the specified power consumption. Since a few days the switch "freezes" with all LED showing a steady light on the ports used. After a power off/on the switch is usable for 30 - 90 minutes before it freezes again.

I have put the 12,8 W camera on a seperate PoE injector with the 3,0 W cam remaining on the switch. With this configuration the switch works normal.

Any ideas? Does the switch possibly "degrades" somehow (it's just 10 month in use)?

Thanks
rgds FR