Model :

Hardware Version :

Firmware Version :

ISP :

Hi
i am not a professional with this profession, so i need some advice's and explanations.

problem: i have a seahouse 300 meter from my main house, and like to have internet there too. (wifi)
purpose is to have cameras, and accesses to internet for music video etc.

i purchased two CPE510 (a+b)
CPE510a was setup as an AP using quicksetup. i gave it the ip 168.192.0.254
CPE510b was setup as a Client using quicksetup. i gave it the ip 168.192.0 253

CPE510a was connected to my main router in the main house. Jensen router with the ip 192.168.38.1
CPE510b was connected to an old Asus router, to provide wifi in the seahouse.

when i use fing on my mobile i can scan the net, and see all the other components, but i cant see the CPE's which might be logical since i am logged on to the Jensen wifi
The Asus router i can see on the tracing, given the ip 192.168.38.190

In the seahouse i had wifi for a while having 5mbit down and 10 up, but i had to repower the system, and i can get it playing again.

a. Can someone describe exactly what the CPE's do? Why should they have this IP? (190.168.0.254/255) ?
b. i presume that the jensen router gives a ip adress to the Asus router since i can scan it to 192.168.38.190, is this the way it should play? the client cpe should not provide any ip addresses to the router? (dhcp not enabled)
c. how should the Asus router be configured?
d. why did i get 5mb down and 10 mbit up?
e. the CPE,s are they sufficient configured using the quick setup, or is other adjustments needed or an advantage?
f. if i scan my pc for wifi stations, i can see the cpe configured as ap, but i cant connect, how come?

hopefully someone can give me some advice's

thanks in advance
pgm