Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I come to share with you my experience with this problem.

I recently bought 2 CPE510 intended for sharing an internet connection between 2 points following the next diagram.




Network config:
CPE510 AP
Ap Mode
IP: 192.168.0.200

CPE510 CLIENT
Client Mode
IP: 192.168.0.254

Both routing table
Destination Gateway Genmask
192.168.0.0 * 255.255.255.0

I can ping From Desktop to CPE510 AP via CPE510 CLIENT, and also I can ping from Desktop to Router but I cannot ping internet, f.e. 8.8.8.8.

I can achieve this by setting the FORWARD POLICY to ACCEPT in both CPE510 iptables login at them via ssh. This option is not present in web app nor Pharos Control.

The problem? That change is not permanent, as soon as I reboot I must login again via ssh and execute again iptables -P FORWARD ACCEPT in both CPEs.

So, is there any way to make this change permanent? Keep in mind that this is a busybox mounted as read-only, I can't modify anything but /tmp (the directory that gets empty every init).

Thanks in advance ;)

Pd:
- I've tried bridge mode
- Ap Router is not suitable for my internet connection.
- Ap isolation is disabled