TL-ER604W PPTP Cl-2-LAN no access to subnet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER604W PPTP Cl-2-LAN no access to subnet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER604W PPTP Cl-2-LAN no access to subnet
TL-ER604W PPTP Cl-2-LAN no access to subnet
2016-04-01 03:39:46 - last edited 2021-08-21 05:58:16
Model : TL-ER604W

Hardware Version : V1

Firmware Version : Build 20141031 Rel.32628s

ISP :

Hi.

I have this router and second router ZyXEL Keenetic Giga II.
The first router: TP-Link IP 192.168.1.1 subnet 192.168.1.0/24
Second: ZyXEL IP 192.168.2.1 subnet 192.168.2.0/24

I picked up on the second router PPTP VPN server.
On the first router I create Client-To-LAN PPTP tunnel to the second. Tunnel has status "Connecting" but only ping IP router. The network behind a router is not available.
If I replace the first router to other ZyXEL Keenetic Giga (v.1) and create PPTP tunnel to the second router then I have full access to the subnet 192.168.2.0/24
On the second router I'm able to create a VPN server and VPN client only. IPsec there is no.
how can I solve this problem?
  0      
  0      
#1
Options
2 Reply
Re:TL-ER604W PPTP Cl-2-LAN no access to subnet
2016-04-29 11:54:28 - last edited 2021-08-21 05:58:16
In your situation, you need to use LAN-to-LAN VPN, and one acts as Server while the other acts as client. The client-to-lan vpn is for remote access.
  0  
  0  
#2
Options
Re:TL-ER604W PPTP Cl-2-LAN no access to subnet
2016-04-29 22:13:52 - last edited 2021-08-21 05:58:16
LAN-to-LAN not possible because ZyXel Keenetic Giga II has VPN server in Client-to-LAN mode only. :(
Even though it is inconvenient, as an exit from this situation I use PPTP tunnel on my computer to ZyXel.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 805

Replies: 2

Related Articles