Need help setting up vlan tagging from tp link switch to edgerouter

Need help setting up vlan tagging from tp link switch to edgerouter

Need help setting up vlan tagging from tp link switch to edgerouter
Need help setting up vlan tagging from tp link switch to edgerouter
Thursday - last edited Friday
Model: TL-SG108E  
Hardware Version: V6
Firmware Version: 1.0.0 Build 20211209 Rel.52369

Hello, I setup vlans so what I did in the edgerouter x:

  • created new vlan 30 interface in edgerouter x
  • made switch0 vlan aware and in eth2 made vid 30
  • made a DHCP server (with subnet 192.168.249.0/24)

And then in the tp link switch (tl-sg108e):

  • in 802.1Q VLAN, change its vlan id 1 to remove port 1, and add vlan 30 for port 1
  • in 802.1Q PVID, change port 1 to pvid 30

When restarting Internet connection from Xbox, it says cant find DHCP server (basically it failed)

I'm not sure what I'm doing wrong, by the way thanks for reading

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Need help setting up vlan tagging from tp link switch to edgerouter-Solution
Friday - last edited Friday

Hi @crazyperson282 

Thanks for posting in our business forum.

Two basic guides for the VLAN.

Common Questions About 802.1Q VLAN

 
It should be untagged and your uplink for VLAN 30 is not included.
Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Need help setting up vlan tagging from tp link switch to edgerouter-Solution
Friday - last edited Friday

Hi @crazyperson282 

Thanks for posting in our business forum.

Two basic guides for the VLAN.

Common Questions About 802.1Q VLAN

 
It should be untagged and your uplink for VLAN 30 is not included.
Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 37

Replies: 1

Related Articles