UDP Broadcast Packet Forwarding
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
UDP Broadcast Packet Forwarding
Region : UnitedStates
Model : TL-SG1008
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon
Trying to pass ArtNet UDP packets through a TK-1008G un-managed switch. ArtNet uses a directed broadcast to a class A network address.
My source device's IP address is 192.168.1.200. The ArtNet devices's IP address is 192.168.1.220.
The directed UDP broadcast packets are sent to 192.255.255.255.
If I directly connect the source device to the ArtNet device, the packets are received and the ArtNet works.
If I connect through the switch the ArtNet device doesn't receive the packets.
Any ideas ?
Thank you,
Steven J. Ackerman, Consultant
ACS, Sarasota, Florida
http://www.acscontrol.com
Model : TL-SG1008
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon
Trying to pass ArtNet UDP packets through a TK-1008G un-managed switch. ArtNet uses a directed broadcast to a class A network address.
My source device's IP address is 192.168.1.200. The ArtNet devices's IP address is 192.168.1.220.
The directed UDP broadcast packets are sent to 192.255.255.255.
If I directly connect the source device to the ArtNet device, the packets are received and the ArtNet works.
If I connect through the switch the ArtNet device doesn't receive the packets.
Any ideas ?
Thank you,
Steven J. Ackerman, Consultant
ACS, Sarasota, Florida
http://www.acscontrol.com
