Omada mesh with different eaps
Deal all,
I am wondering if it is possible to combine an EAP650 (ceilling) with an EAP615 (wall) in one mesh system running on an oc200.
would seamless roaming work as well?
thx
Thanks for that info. EAP615-wall supports mesh.
This info can be found from the release note of version 1.2.3.
For this kind of info, such as new features supportivity, you may check from the release note of the products' firmware release note. They are all updated.
Hi @Seef,
You can use different model APs for the "mesh" as long as they support it. The TP-Link web site has conflicting information regarding the EAP615-Wall (sited below), but I'm guessing that it currently does not support mesh. Seamless roaming is supported on both the 650 and 615-Wall.
The Omada Mesh Devices page currently lists the EAP-615-Wall
The EAP-615-Wall datasheet currently shows that it does not support the Omada Mesh
Thanks for that info. EAP615-wall supports mesh.
This info can be found from the release note of version 1.2.3.
For this kind of info, such as new features supportivity, you may check from the release note of the products' firmware release note. They are all updated.