Having hard time getting IP from Opnsnese VLANS through SG-108E switch
I am facing a issue where smart switch configured with VLAN's not assigning IP thru Opnsnese. HEre are details :
1- I created VLAN on OPT1 - 10.10.20.10 interface
VLANS tagged as :
- USER[30]-10.10.30.10
- IOT[40]-10.10.40.10
- DMZ[50]-10.10.50.10
2- Assigned interfaces all are active
3- Enabled DHCP ranges
4- Attached smart switch in setup confogued VLANS as follows:
- Tagged port 8 - Opnsense cable from OPT1 interface to switch
- Untagged port 1,2 and port port 3,4 and port 5,6
However when I insert PC port to switch port 1 or 2 dont get IP which I am suppose dto get from USER VLAN 10.10.20.100-10.10.30.200 ranges
Same happens t other untagged ports whcih were tagged /trunk port 8 for opnsnes OPT1 interface
Any help or direction if I am mking any mistakes.
Hi @Hassan786
Thanks for posting in our business forum.
Hassan786 wrote
Hi thanks for a help. Actually I am running OPnsnese on Proxmox VM with 2 Interfcaes ONE LAN and other OPT1 where VLANS are setup .
All VLANS on
opnsnese operational and setup .
Not sure if there are any special settings that should be set on the VM. I don't have much experience in VM. I mainly use prebuilt routers flushed with different systems. But the VLAN looks good to me on the switch.
