Early Access Omada SDN Controller_V5.15.8 Pre-Release Firmware(Update on Jan 8th, 2025)
This Article Applies to
Omada_SDN_Controller_v5.15.8.2 Windows (Windows 10/11/Server, 64bit Recommended)
Omada_SDN_Controller_v5.15.8.2_linux_x64.tar
Omada_SDN_Controller_v5.15.8.2_linux_x64.deb
OC200(UN)_V1_1.34.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC200(UN)_V2_2.19.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC300(UN)_V1_1.28.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC400(UN)_V1_1.6.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
Overview
We hope to offer you a chance to experience the new features added in the Controller v5.15.8 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Upgrade Note(for OC200 & OC300 with Built-in Controller v5.13 and older)
You can use the following 2 methods to upgrade to this version:
1. Upload Firmware v5.15.6 in Global View > System Settings > Hardware Controller Firmware > Manual Upgrade, and upgrade directly.
2. Check for Upgrade in Global View > System Settings > Hardware Controller Firmware; you will get the latest firmware as v5.14.32. After upgrading to Built-in Controller v5.14.32, you can check for upgrade and upgrade to Built-in Controller v5.15.6.
Since version 5.14.32, Omada Controller no longer supports upgrades from Controller v4.
Release Notes
1. Supported Device Models
For device models Omada Software Controller supports, refer to: Omada Cloud SDN Platform Compatibility List
2. New Features
1) Added support for batch configuration of Port VLANs on Wall Plate EAPs at Devices (EAP) >Ports.
3. Enhancements
1) Optimized the VLAN configuration of Easy Managed Switch. The adopted Easy Managed Switch defaults to All Profile, which supports up to 32 VLANs. If there are over 32 VLANs, the Tagged VLAN could be manually selected.
2) Optimized the LAN profile by removing the Easy Managed Switch Enabled toggle so that all VLANs can be available to Easy Managed Switch.
4. Bug Fixed
1) Fixed bug where exporting voucher only export unused vouchers.
Notes
1. This version of the Controller is fully applied to the Omada APP of version 4.20 or above.
2. Easy Managed Switch VLAN optimization is applicable in Omada APP v4.22.
3. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
4. Since version 5.14.32.2, Omada Software Controller no longer supports upgrade from Controller v4.
5. Since version 5.14.32.2, Omada Software Controller(windows) only supports installation on Windows64-bit platform.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.
(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.
Firmware Download Link
-
Direct Download
Omada_SDN_Controller_v5.15.8.2_windows
Omada_SDN_Controller_v5.15.8.2_linux_x64_deb
Omada_SDN_Controller_v5.15.8.2_x64_tar.gz
OC200(UN)_V1_1.34.1 (pre-release version) > Built-in Omada SDN Controller 5.15.8.11
OC200(UN)_V2_2.19.1 (pre-release version) > Built-in Omada SDN Controller 5.15.8.11
OC300(UN)_V1_1.25.1 (pre-release version) > Built-in Omada SDN Controller 5.15.8.11
OC400(UN)_V1_1.6.1 (pre-release version) > Built-in Omada SDN Controller 5.15.8.11
OC200(UN)_V1_1.34.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC200(UN)_V2_2.19.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC300(UN)_V1_1.28.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC400(UN)_V1_1.6.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
Additional Information
If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:
- Omada Controller version (previous and current)
- Device Model(s), Hardware and Firmware versions
- (if possible) A copy of the Log file and Backup Config file
If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.
>> How to get the Log file and Backup Config file for Omada SDN Controller:
-
If your Windows software controller failed to get launched, please locate the controller installation path for the Log file.
-
If it's not a launch issue, you can export the Log file and Backup Config file in the local network.
-
For Omada Controller v5.8 or later version,
In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.6 or v5.7,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.5 or previous version,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.
-
Update Log
Jan 16th, 2025
Update the pre-release version for hardware controllers
OC200(UN)_V1_1.34.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC200(UN)_V2_2.19.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC300(UN)_V1_1.28.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
OC400(UN)_V1_1.6.2_pre-release (Built-in Omada SDN Controller 5.15.8.12)
Jan 8th, 2025
Provide the following controller firmware for early access.
OC200(UN)_V1_1.34.1_pre-release (Built-in Omada SDN Controller 5.15.8.11)
OC200(UN)_V2_2.19.1_pre-release (Built-in Omada SDN Controller 5.15.8.11)
OC300(UN)_V1_1.28.1_pre-release (Built-in Omada SDN Controller 5.15.8.11)
OC400(UN)_V1_1.6.1_pre-release (Built-in Omada SDN Controller 5.15.8.11)
Jan 6th, 2025
Provide the following controller firmware for early access.
Omada_SDN_Controller_v5.15.8.2_pre-release_windows
Omada_SDN_Controller_v5.15.8.2_pre-release_linux_x64_deb
Omada_SDN_Controller_v5.15.8.2_pre-release_x64_tar.gz
Recommended Threads
TP-Link Early Access Program Is Now Available!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for your feedback.
On my controller, it's 5.15.8.2, and I can see TP-Link DDNS.
But I didn't add a gateway to the site yet.
May I know what's the model number of the gateway adopted on your controller?
daubstep wrote
@kogan I upgrade from v5.15.8.1 to v5.15.8.2 software controller and I also see what you are seeing - no dropdown option for "TP-Link Dynamic DNS". If you expand the help section, it lists it as if it should be available, but it is not. Otherwise, the upgrade seems to be working correctly and have gone smoothly so far for me...
- Copy Link
- Report Inappropriate Content
@Vincent-TP The site dashboard for mobile isn't loading for the OC200 V2 on 2.19.1
- Copy Link
- Report Inappropriate Content
is anti wifi sharing or anti wifi hotspot tethering features added in oc200 v2 newly release 5.15.8 firmware update ?
- Copy Link
- Report Inappropriate Content
@Vincent-TP I'm using the ER707-M2 v1.0 gateway.
- Copy Link
- Report Inappropriate Content
Hi @Gr3y
What's the phone and browser you are using?
Did you try with different web browsers?
Does this also happen on a PC web browser?
- Copy Link
- Report Inappropriate Content
@Vincent-TP I'm on android 14 (OxygenOS 14) using Firefox.
Yes, I tested on chrome as well and same issue occurs.
The issue goes away when switching to desktop mode on mobile or while accessing the desktop site on a PC so I suspect it's an issue with the css handling screen size.
- Copy Link
- Report Inappropriate Content
I tried it on nearly ALL routers - no Tp-Link DDNS.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you for the info.
Maybe you could expand this little information to the controllers added feature, that only DR3650v has this possibility.
- Copy Link
- Report Inappropriate Content
Noticed some issues on my OC200 v1 running the latest
Once the audit logs are full, and it starts deleting old ones to make room for new ones, the entire controller becomes unstable, sometimes unresponsive and overall glitchy.
There doesnt seem to be any way to either turn off audit logs, or actually delete old entries - can this be added? Not everyone wants or needs a log of everything done on the controller, especially for smaller organisations.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3809
Replies: 21
Voters 0
No one has voted for it yet.