power EAP615-Wall via PoE injector

power EAP615-Wall via PoE injector

power EAP615-Wall via PoE injector
power EAP615-Wall via PoE injector
a week ago - last edited a week ago
Tags: #power
Model: EAP615-Wall  
Hardware Version: V2
Firmware Version:

Hi! Is it possible to power on the EAP615-Wall via a PoE injector like the TL-POE150S? I can't quite understand if a PoE active device can be powered like this or not.

Thanks!

  0      
  0      
#1
Options
1 Accepted Solution
Re:power EAP615-Wall via PoE injector-Solution
a week ago - last edited a week ago

Hi  @Fabio_C 

 

To use the full feature, I would recommend 802.3at POE-capable POE injector TL-POE160S

Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:power EAP615-Wall via PoE injector
a week ago

  @Fabio_C 

 

Yes, it's 802.3af compliant, so it will interop with the AP just fine.

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#2
Options
Re:power EAP615-Wall via PoE injector-Solution
a week ago - last edited a week ago

Hi  @Fabio_C 

 

To use the full feature, I would recommend 802.3at POE-capable POE injector TL-POE160S

Recommended Solution
  1  
  1  
#3
Options
Re:power EAP615-Wall via PoE injector
a week ago

  @Fabio_C 

 

With all due to respect to V-TP above, if you aren't using the POE-port out feature (which I am 99.99% sure you aren't), there's not need to spend more on an af/at-capable adapter over the standard af version.  If I could unvote his answer, I would.

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 95

Replies: 3

Tags

power
Related Articles