Building to Building Routing in Omada Ecosystem

Building to Building Routing in Omada Ecosystem

Building to Building Routing in Omada Ecosystem
Building to Building Routing in Omada Ecosystem
3 weeks ago - last edited 3 weeks ago

Hello, I would like to ask if the following setup is possible in omada ecosystem.

 

We have two homes, each with a single line ISP, each home has its server, and we planned to setup omada ecosystem network (router, switch, ap) in each house. Between those homes, a PTP radio network has been set up and tested with other brand radio.

 

My First Objective is:
When ISP in Home A become offline, client in Home A able to reach Internet from ISP in Home B, vice versa.

 

My Second Objective is:
Client in Home A, able to access Server in Home B, and Client in Home B also able to talk with Server with Home A.

Does Omada Router and Omada Software able to perform such routing condition? Do I need specific type of router or does all omada router support this setup?

 

Does the communication between Router over PTP radio network happen in WAN or LAN side?

 

Thank you.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Building to Building Routing in Omada Ecosystem-Solution
3 weeks ago - last edited 3 weeks ago

Hi  @GoodMeMD 

 

for the First Objective, unfortunately, that's not possible.

A site disconnected from the Internet is unable to get in touch with the outside world; therefore, it is not possible to get the Internet from another site.

 

For the second objective, you can create a site-to-site IPsec VPN to do this.

 

How to configure LAN-to-LAN IPsec VPN on TP-Link Router

 

 

Does the communication between Router over PTP radio network happen in WAN or LAN side?

>>>Is the PtP radio similar as the scenario in this article?  If yes, they should be in LAN side.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Building to Building Routing in Omada Ecosystem-Solution
3 weeks ago - last edited 3 weeks ago

Hi  @GoodMeMD 

 

for the First Objective, unfortunately, that's not possible.

A site disconnected from the Internet is unable to get in touch with the outside world; therefore, it is not possible to get the Internet from another site.

 

For the second objective, you can create a site-to-site IPsec VPN to do this.

 

How to configure LAN-to-LAN IPsec VPN on TP-Link Router

 

 

Does the communication between Router over PTP radio network happen in WAN or LAN side?

>>>Is the PtP radio similar as the scenario in this article?  If yes, they should be in LAN side.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 123

Replies: 1

Related Articles