Connecting 2 EAP110 Access Points
We have two EAP110 Acces Pointes, one is on the outside of a shed and is hard-wired into our network and creates an SSID wi-fi. Then we have a second EAP110 across the road in plain sight. How do we connect the two so they are using the same wi-fi network? Thank you.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @HawkinsIT
Do you need the second EAP110-outdoor wirelessly connecting to the first one?
EAP110-outdoor can't do that.
You can consider a pair of CPE510, and build a wireless bridge.
How to build a Wireless Network between home and farm using tp-link products
Or EAP215-bridge KIT combined with Omada controller.
- Copy Link
- Report Inappropriate Content
Hi @HawkinsIT
Do you need the second EAP110-outdoor wirelessly connecting to the first one?
EAP110-outdoor can't do that.
You can consider a pair of CPE510, and build a wireless bridge.
How to build a Wireless Network between home and farm using tp-link products
Or EAP215-bridge KIT combined with Omada controller.
- Copy Link
- Report Inappropriate Content
Can the 2nd EAP110 at least see the wi-fi network? Or no?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@HawkinsIT The second EAP110-outdoor has to be configured in repeater mode. This work in my similar setup. You can configure this after fresh start (do a reset) of the EAP110-outdoor. See https://www.tp-link.com/en/support/faq/3646/
- Copy Link
- Report Inappropriate Content
@SebStaeubert 110 in repeater mode is correct answer.
There should be a rule against forum mods marking their answer as *best*, especially when it isn't.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 261
Replies: 5
Voters 0
No one has voted for it yet.