Topology changes, EAP with lines and without
Topology changes, EAP with lines and without
Tags:
#Controller Installation
Hi.
My topology changes back and forth between these two. I can't find in the manual or topics here if there is any practical difference. The EAP switches between being connected with lines to the rest of the system, to being below without connecting lines.
Attached a diagram showing how everything is wired.
Re:Topology changes, EAP with lines and without
I haven't really noticed anything other than the topology map changing.
When they are without lines they are still descibed as wired AP under "Mesh".
I've googled, searched forums and manual, but can't seem to find any explanation as to what it means.
When I ping between router and AP it's on the same level regardless.
Within 20 minutes it can go from both with lines, to only one with lines, to both with lines.
