Home

Forums

Stories

Knowledge Base

Business Community > All Threads > Using TP AC+AP with third party 3in1 Router+Switch+AC

< All Threads

Using TP AC+AP with third party 3in1 Router+Switch+AC

overmind_001

2024-08-07 05:17:50 - last edited 2024-08-15 08:38:40

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-07

Using TP AC+AP with third party 3in1 Router+Switch+AC

2024-08-07 05:17:50 - last edited 2024-08-15 08:38:40

Tags: #Presales

Model: OC200 EAP773

Hardware Version:

Firmware Version:

I am planning setup a system for my new home.

I intended go with Wifi7, using the Omada EAP772 or EAP773 as the AP.

The broadband service I intended to subscribe is 2.5 or 10 Gbps.

I am looking for a 2.5G/10Gbps Omada 3 in 1 integrated Router lke the ER7212PC.

ER7212PC cannot actually exploit the speed of the 2.5/10Gbps broadband. and there isn't other model that support 2.5G/10Gbps

I stumbled on this TL-R6812TP-AC, which comes with 8xSPF+ and 4xGigabit (PoE).

it is a China Model that is having its own AC capabilities. I am not sure if it will work with Omada EAP772/3.

I have this feeling that TL-R6812TP-AC will not be compatible with Omada APs.

What if I just use TL-R6812TP-AC as a third party Router + Switch, and I will connect an Omada AC OC200 to TL-R6812TP-AC.

I wonder would this configuration will work?

1 Accepted Solution

Vincent-TP

2024-08-08 02:24:59 - last edited 2024-08-15 08:38:40

Posts: 1201

Helpful: 117

Solutions: 464

Stories: 0

Registered: 2024-06-22

Re:Using TP AC+AP with third party 3in1 Router+Switch+AC-Solution

2024-08-08 02:24:59 - last edited 2024-08-15 08:38:40

Hi @overmind_001

For Internet access and full speed, there should be no problem.

But we can't use TL-R6812TP-AC to manage Omada EAP. If you plug an OC200 into the network, that will work.

Information

Helpful: 0

Replies: 1

Using TP AC+AP with third party 3in1 Router+Switch+AC

Using TP AC+AP with third party 3in1 Router+Switch+AC

Information

Voters 0

Tags