Backup cfg files not working

Backup cfg files not working

Backup cfg files not working
Backup cfg files not working
2024-08-03 03:51:01 - last edited 2024-08-05 00:14:11
Hardware Version: V5
Firmware Version: 5.14.26.1

Unfortunately omada is a nest of errors. Omada controller is not even close to an enterprise router 

For some unknown reason I had problems with the driver and decided to reinstall the driver. I have several backups made both automatically and manually of the same version and also backups of just the configuration. And guess what...... none of them work.

FATAL ERROR  

  0      
  0      
#1
Options
1 Accepted Solution
Re:Backup cfg files not working -Solution
2024-08-04 16:33:12 - last edited 2024-08-05 00:14:11

  @MR.S I reinstalled the Omada controller and also Java 8 update 811 and the failures continued and I could not use the cfg backups so I decided to update java 8 to update 821 and everything started to work correctly I suppose the failure was in that version of java 

 

If anyone has similar errors, java 8 update 821 is stable with omada controller (windows) 

 

I recommend after updating the java to also reinstall the omada controller (to ensure a clean installation  )

 

Thank you  @MR.S  For helping me  

Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:Backup cfg files not working
2024-08-03 04:31:40

  @Josvell 

 

I've never had problems with restore, so there must be something else wrong here. try to uninstall everything and install with 64b java 8 then install the controller. I suspect it's something with your installation.

 

  0  
  0  
#2
Options
Re:Backup cfg files not working
2024-08-03 04:41:10

  @MR.S thanks for answering friend. I'm going to reinstall java 8 64bits. I also have java se development kit 21.0.3 (64bits) on the same PC that runs omada, there would be no problem, is that correct?  

  0  
  0  
#3
Options
Re:Backup cfg files not working
2024-08-03 05:20:14

  @Josvell 

 

I don't know, but try.

 

  0  
  0  
#4
Options
Re:Backup cfg files not working -Solution
2024-08-04 16:33:12 - last edited 2024-08-05 00:14:11

  @MR.S I reinstalled the Omada controller and also Java 8 update 811 and the failures continued and I could not use the cfg backups so I decided to update java 8 to update 821 and everything started to work correctly I suppose the failure was in that version of java 

 

If anyone has similar errors, java 8 update 821 is stable with omada controller (windows) 

 

I recommend after updating the java to also reinstall the omada controller (to ensure a clean installation  )

 

Thank you  @MR.S  For helping me  

Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 281

Replies: 4

Related Articles