OC200 offline after an update

OC200 offline after an update

OC200 offline after an update
OC200 offline after an update
2024-07-20 02:36:56
Model: OC200  
Hardware Version:
Firmware Version:

Hi. I put off updating the controller for months and two days ago, I finally updated the firmware. Then this happened. After the update, the OC200 was showing offline when I was checking it remotely. Today came to the coffee shop and found that the light for CLOUD is off. I tried removing the power and reestablishing power, I also tried to click the reset button to reset to factory, nothing helped.

 

What to do?

  0      
  0      
#1
Options
1 Reply
Re:OC200 offline after an update
2024-07-22 07:46:40 - last edited 2024-07-22 07:47:18

  @IKUygongco 

If you've reset it, you should reconfigure it. As of now, please check to see if the OC200 has an Ethernet connection. To test it, connect a computer to the OC200's additional Ethernet port. Also, please try to re-enable Cloud Access. During the upgrade, ensure that the internet is stable.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options