ER8411 Pre-purchase questions.
Looking at procuring an ER8411. However, a couple of questions I have which are make & break for me.
1: Can you define multiple public IPs on the WAN interface, which would be PPPoE in my case? In addition, can you perform DST & SRC NAT using those IPs?
For example, I'd need to port forward 443 from public IP A to 10.0.0.1 and I'd also need 10.0.0.2 to have public IP B when performing a what is my ip lookup.
2: Does the WAN 10G SFP+ have to be for WAN, or could it be assigned to LAN? For example, I'd like to connect 2 switches direct to the router using DAC. Then connect the ONT from my internet service to one of the ports on a switch, presenting that as a VLAN and configuring PPPoE on the router to use that.
I also intend to be using an Omada controller to manage this all, if that makes any difference.
Hi @mg4455
Thanks for posting in our business forum.
1. No to both.
How to configure One-to-One NAT on Safestream routers using the new GUI
WAN Alias which is something to your description, but it does not support PPPoE.
2. Dual SFP+. One is dedicated WAN, one is WAN/LAN.
Hi @mg4455
Thanks for posting in our business forum.
1. No to both.
How to configure One-to-One NAT on Safestream routers using the new GUI
WAN Alias which is something to your description, but it does not support PPPoE.
2. Dual SFP+. One is dedicated WAN, one is WAN/LAN.