Er707-m2 CityFibre

Er707-m2 CityFibre

22 Reply
Re:Er707-m2 CityFibre
2024-05-16 15:18:16 - last edited 2024-05-16 16:04:16

  @ckdash 

 

If you have set up the VLAN in both controller and standalone mode and it does not work, then it is not a problem with the router.

 

@Clive_A   It is a problem with the router if its NOT actually tagging the WAN port on egress.

 

@ckdash I suggest using the port mirroring functionality to mirror the WAN port to an unused port and then using wireshark on the port to see if the egress data is actually tagged

 

edit: just noticed this thread https://community.tp-link.com/en/smart-home/forum/topic/608944?sortDir=ASC&page=2 seems there was a beta f/w to fix this issue

Ā  0 Ā 
Ā  0 Ā 
#12
Options
Re:Er707-m2 CityFibre
2024-05-16 17:58:03

  @ckdash 

 

I've done tests in the controller and stand alone with vlan on the WAN, no problems, but the story doesn't say anything about which firmware you're using, if you don't have the latest then upgrade. If it doesn't work then the problem must be something other than the router.

 

 

Ā  0 Ā 
Ā  0 Ā 
#13
Options
Re:Er707-m2 CityFibre
2024-05-16 19:00:31

  @MR.S thanks. I'm increasingly coming to the conclusion that the problem lies "between keyboard and chair". It's not like I'm a novice at this - I've configured loads of routers and networks in my time. 
Ruling things out along the chain:

- ONT: works with Asus XT8 router

- ONT to router cable: same cable works with Asus router, and the port indicator lights show 2.5Gbps connection

So we're now at the router. It powers up, it's happily dishing out addresses to devices on the LAN and it's been adopted by the OC200. 
The screenshots of the config show the same as someone put earlier in the thread.

The firmware is for V1 hardware which my device says it is and is Build: 20240324 which I believe is the latest.

The firmware for the OC200 controller is 1.29.4 Build 20240304 Rel.54362

 

Ā  0 Ā 
Ā  0 Ā 
#14
Options
Re:Er707-m2 CityFibre
2024-05-16 19:25:49

  @ckdash yes, then you have the latest firmware, then it's checked out :-)
I have an ER707-M2 in a lab and I configured vlan 999 on the switch that is tagged this vlan. then I tested in controller and stand alone against vlan999. this is how the configuration looks in controller mode.

 

 

 

What happens if you connect to a PC instead of a router? have you tried setting vlan on the network card. I use vlan 999 on the test you have to edit to match your vlan

 

Ā  0 Ā 
Ā  0 Ā 
#15
Options
Re:Er707-m2 CityFibre
2024-05-16 19:32:35

  @ckdash 

 

can you show me a screenshot of the vlan configuration on the Asus router to?

 

 

 

Ā  0 Ā 
Ā  0 Ā 
#16
Options
Re:Er707-m2 CityFibre
2024-05-16 20:13:06

  @MR.S I can indeed show an Asus XT8 screenshot

 

Ā  0 Ā 
Ā  0 Ā 
#17
Options
Re:Er707-m2 CityFibre
2024-05-16 20:51:11 - last edited 2024-05-16 20:54:05

  @ckdash 

 

it looks like it's something else, it's IPTV configuration, do you have a screenshot of the wan settings of Asus router?

you will again find IPTV settings on the Omda controller if you go to services, IPTV

when i test there seems to be something wrong i can't bring up any wan port. the box is empty. on my ER8411 router I can select the WAN interface here.

 

what happens when you try here?

 

Ā  0 Ā 
Ā  0 Ā 
#18
Options
Re:Er707-m2 CityFibre
2024-05-16 21:09:44

  @MR.S hi. That's how you set the WAN VLAN on Asus. It is a bit odd. 
You can't do it that way on the TP-Link. You can't set the WAN 1 port to be the IPTV port. 

You can set one of the other ports to be a WAN port, and then allocate that port on the IPTV screen. But I've tried that, and it doesn't work either. 

Ā  0 Ā 
Ā  0 Ā 
#19
Options
Re:Er707-m2 CityFibre
2024-05-17 01:05:25

Hi @ckdash @MR.S 

Thanks for posting in our business forum.

I can do that on ER8411.

 

The point is that this should not matter. It is Internet and ASUS is configuring the Internet instead of IPTV VLAN or IP-Phone VLAN.

Configuring the VLAN ID on the WAN should be working. Unless it is your ISP messes this up and the Internet is somehow configured to be IPTV or IP-Phone VLAN.

 

Like MR.S wrote, will you get Internet if you set your computer with VLAN ID?

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Ā  1 Ā 
Ā  1 Ā 
#20
Options
Re:Er707-m2 CityFibre
2024-05-17 06:25:00

  @Clive_A 

 

I can also select WAN interface on ER8411, but I cannot select anything on ER707-M2 or ER706W, I don't know if the problem is controller or router, I use controller version 5.14.20.8 running on windows which is early release.

 

 

 

 

Ā  1 Ā 
Ā  1 Ā 
#21
Options
Related Articles