Hi,

I have established a LAN-to-LAN IPsec VPN connection between my ER605 and a remote network.

This is working and from both networks I can access the other local network devices. 

I would now like that for one specific Ethernet port on the ER605, all traffic is to be routed through the VPN connection. I.e. for this specific port, a connected device would access internet not through the local WAN but through the VPN tunnel.

How would I do this?

I would have expected that I would need to

1) Create a new VLAN and assing it to the required port

2) Create IP_Group for VLAN

3) Create Policy Routing with created IP_Group as Source IP and VPN as WAN.

Unfortunately, the Selectable WAN is only the local WAN and the UBS-Modem, not the VPN connection.

Any hints what I would need to do?