Home

Forums

Stories

Knowledge Base

Business Community > All Threads > SG2008P DHCP not working

< All Threads

SG2008P DHCP not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SG2008P DHCP not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

aabdalajr

2024-02-13 14:02:43 - last edited 2024-02-17 02:23:23

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-02-13

SG2008P DHCP not working

2024-02-13 14:02:43 - last edited 2024-02-17 02:23:23

Tags: #VLAN & Multi-Networks #DHCP Service #Configuration

Model: SG2008P

Hardware Version:

Firmware Version: 3.20.1 Build 20240115 Rel.72847

Hi to all of you,

I have recently bought some Omada equipment's to start building my new network. The idea is to create some VLANs to segregate the network (home, IoT, guests and so on). Therefore, I have bought the SG2008P and two EAP235. Considering cost saving, I did not buy the Controller - instead, have deployed it in a vm.

So as of now my setup is the following:

Network

I have tried to setup VLANs within the switch and did deploy it to the EAP, but the DHCP server is not working properly. Is there any other any to deploy it without buying the Omada router (or any other router)? As soon as I adopt the switch to the Controller, I loose the capability to change the L2 and L3 configurations, but without it I cannot manage the EAP and create the WiFi networks. Any possible solution?

Thank you & best regards

Alexandre

1 Accepted Solution

Clive_A

2024-02-14 09:08:19 - last edited 2024-02-17 02:23:23

Posts: 5602

Helpful: 2687

Solutions: 1253

Stories: 0

Registered: 2023-06-09

Re:SG2008P DHCP not working-Solution

2024-02-14 09:08:19 - last edited 2024-02-17 02:23:23

Hi @aabdalajr

1. Wrong use case. Refer to this FAQ 887 if you are setting it up in standalone. You have to make sure your ISP router supports multi-nets NAT. Or it would not work.

2. DHCP is not working, read the guide and check if you have set it up properly in standalone.

3. If you are using the controller, you of course cannot set up the L2 and L3 features like the standalone mode. And nothing works in Wired Networks > Internet or LAN because you don't have a router. Most functions that rely on the router would simply not work if you just have a switch. Things that are switch-based will work if you configure them on the controller.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Information

Helpful: 0

Replies: 1

SG2008P DHCP not working

SG2008P DHCP not working

Information

Voters 0

Tags