Business Community > All Threads > Configure 2 router with Static IP and switch with same local network access
< All Threads

Configure 2 router with Static IP and switch with same local network access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configure 2 router with Static IP and switch with same local network access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configure 2 router with Static IP and switch with same local network access
Configure 2 router with Static IP and switch with same local network access
2024-02-11 20:16:45 - last edited 2024-02-18 02:34:25
Tags: #VLAN & Multi-Networks #Configuration

Hello,

 

Devices:
# TP-Link ER605 V2 Router
# TP-LINK ER8411 Router
# TP-LINK SG3210 Managed Switch 8 port

 

Computers:
# 6 Computer with http servers and databases / backups

 

What am i trying to do:
# All 6 PC can talk to each others, have internet access.
# Static IP 1 accept http request to PC1 and IP 2 to PC2. If possible use more PC for http to process requests.
# PCs have only one LAN port.


Multi WAN configuration not working for me, normally PC took 3 seconds to process a request. Using multi WAN first one working fine but seconds one take 15 seconds extra. There is no configuration other that setting up static ip on router.

If anyone can help or provide some suggestion how to configure the network.
Thank you.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Configure 2 router with Static IP and switch with same local network access-Solution
2024-02-13 20:01:42 - last edited 2024-02-18 02:34:25

  @sanGg 

 

I understand that the multi-WAN functionality in a single router did not work for you for some reason. However that’s your best bet for handling multiple Internet connections. Having that done using multiple routers would require an advanced networking configuration and equipment that can support it. That means you would need to invest a lot of time in learning and quite a bit of money. If that simple configuration I have described does not meet your requirements, I think you should try to resolve the issues you have had with the single-router, multi-WAN solution. Unfortunately I'm not familiar with your routers so I can't help you with it.

Kris K
Recommended Solution
  2  
  2  
#4
Options
5 Reply
Re:Configure 2 router with Static IP and switch with same local network access
2024-02-13 16:15:04

  @sanGg 

 

If you want PC1 to use ER8411 as its Internet gateway, you need to provide IP-1 as its default gateway. Similarly, if you want PC2 to use ER605 as its Internet gateway, you need to provide IP-2 as its default gateway.

Kris K
  1  
  1  
#2
Options
Re:Configure 2 router with Static IP and switch with same local network access
2024-02-13 18:29:38 - last edited 2024-02-13 19:05:39

  @KJK 

 

Thank you for your time. I am  new to this, sorry for the newbie question.

 

What i want is all PC connected to each other and use multiple ISP (currently 2) to serve HTTP request using multiple PCs to serve lots of request concurrently.

I have TP-LINK SG3210 Managed Switch 8 port.


If you can guide me or if there any existing guide i can follow.

 

Thank you

  0  
  0  
#3
Options
Re:Configure 2 router with Static IP and switch with same local network access-Solution
2024-02-13 20:01:42 - last edited 2024-02-18 02:34:25

  @sanGg 

 

I understand that the multi-WAN functionality in a single router did not work for you for some reason. However that’s your best bet for handling multiple Internet connections. Having that done using multiple routers would require an advanced networking configuration and equipment that can support it. That means you would need to invest a lot of time in learning and quite a bit of money. If that simple configuration I have described does not meet your requirements, I think you should try to resolve the issues you have had with the single-router, multi-WAN solution. Unfortunately I'm not familiar with your routers so I can't help you with it.

Kris K
Recommended Solution
  2  
  2  
#4
Options
Re:Configure 2 router with Static IP and switch with same local network access
2024-02-17 21:02:44

  @KJK 

 

Thank you.

  0  
  0  
#5
Options
Re:Configure 2 router with Static IP and switch with same local network access
2024-02-18 02:35:40

Hi @sanGg 

Thanks for posting in our business forum.

As KJK wrote, this is the case. You gotta use one router and multi-WAN setup to achieve this.

 

Cannot work around this because it is under two different NAT. This would only cause a problem.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 817

Replies: 5

Tags

VLAN & Multi-Networks Configuration
Related Articles
How to configure the switch
353 0
ER605 - USB Modem - Static IP configuration
971 0
configure load balancer 2 static public IP
1480 0
Router & Switch configuration
988 0
Switch Configuration issue
303 0
Firewall config for single static IP
582 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.