Dear  @Clive_A 

I am experiencing the same issue as @kogan .

Model: ER706W  

Firmware Version: 1.0.3

Omada Controler version: 5.13.23

I have an ER706w and the EAP650. No 6ghz activated. 

Roaming is working fine when WPA2 is activated, however, when a change to WPA3, roaming is not working. The issue is that  I have roaming when I move from ER706W to EAP650, but when I move from EAP650 to ER706W roaming is not working and mobile continues sticked to EAP650 with a very bad signal. So I confirm this is a "real bug". The problem is that my company mobile forces me to have WPA3 connection. Please, @Clive_A , could you check it in lab?

I paste my Wireless configuration

  @Clive_A 

which RSSI value is recommended? 76? 80?

@Merfild

could you paste advanced settings of your WIFI please?

 Dear  @Clive_A 

My testing device is an Oppo Find X5 that support 802.11ax protocol. 

@MR.S, here are my advanced features. Since you have an EAP653 I would appreciate you could test it with this set up. I see that I and @kogan have the same setting. 

I am not setting any RSSI Threshold since its working fine with the default setting. Anyway, I will do some trials tonight. In addition,  I have downloaded WiFiman and I will paste here the pictures after the trials.

Thanks for the support. We keep in touch

  @Merfild 

I havent EAP653 conneted to ER706W anymore so cant test more on this now. I use this access point in another network,

but as i mention I use channel 112 and 80 Mhz bandwith and EAP653 and ER706W was meshed wireless,

firmware on ER653 is beta version 1.0.90 Build 20231012 Rel. 31553

this settings on controller.

have you tryed to test wirh wifiman from unifi? this tool is nice to test roaming.

Dear @Clive_A 

Here are the results about my investigations during the weekend. 

As you can see in the image below, if only WPA2 is activated, then roaming works in both directions: From ER706W to EAP650 and viveversa. No RSSI Thresold set up at this moment. 

However, when I activate WPA3 then the roaming from EAP650 to ER706W has the following behavior: 

As you can see, when the mobile leave the EAP650 there is a disconnection period (I am completely close to the ER706W)  and, finally, it connects to the EAP650 (that is far away)  but in the 2,4ghz frecuency. 

In addition, sometimes I got the following behavior: 

As you can see there is a disconnection period (I am very close to ER706W) and finally it connects to the ER706W. If I set up a RSSI thresold problem is not solved. It becomes even worse. However, when I move from WPA3 to WPA2, teh problem is solved. 

Now there are "only"  two people (@kogan and I) that are having the same problem. But, please, take into consideration that router ER706W is quite a new product and only a few people get it. I am quite sure that TL Development department needs to know about it.  

Thanks for your support and regards, 

Looking forward to hearing from you

  @Clive_A 

Always the latest one. Since #1 nothing changed 

Hello   @Clive_A 

ER706W -  1.0.3

EAP650- 1.0.13

@kogan 

This weekend I receive and update for EAP650. Please check if you get It

Thanks