Simple configuration two LANs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Simple configuration two LANs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Simple configuration two LANs
Simple configuration two LANs
2024-01-19 12:03:46 - last edited 2024-01-21 09:19:02
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.3

Hi Guys!

 

I`m using Omada SDN with following HW

 

 

I like to separate my NAS from the rest of the network. I did set up a second LAN on one of the ports L2 with an adressrange 220.110.20.1/24.

I had defined a route between both LANs to get access to the NAS. 

but I do not get internet Access from there. what I'm doing wrong?

 

Thankyou for your help.

 

 

 

 

ER605 V2 EAP653 V1
  0      
  0      
#1
Options
1 Accepted Solution
Re:Simple configuration two LANs-Solution
2024-01-21 02:32:58 - last edited 2024-01-21 09:19:02

  @wickie 

Do you have a config lay out for us to check?

So maybe you need to read the multi network setup guide on the official website. Which should help you resolve most multi network issues.

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Simple configuration two LANs-Solution
2024-01-21 02:32:58 - last edited 2024-01-21 09:19:02

  @wickie 

Do you have a config lay out for us to check?

So maybe you need to read the multi network setup guide on the official website. Which should help you resolve most multi network issues.

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
Recommended Solution
  0  
  0  
#2
Options
Re:Simple configuration two LANs
2024-01-21 10:21:27 - last edited 2024-01-22 02:26:03

  @Tedd404 

 

please take a look to the original post. there you can find a picture and what I like to do.

It is simply to connect a NAS device on one of the Ports L2 and setup a second network. 

I can ping the NAS but don't have access to the internet from the NAS. Any documentation I can find ist using a manged switch which I don't have.

ER605 V2 EAP653 V1
  0  
  0  
#3
Options
Re:Simple configuration two LANs
2024-01-22 02:28:51

Hi @wickie 

Thanks for posting in our business forum.

wickie wrote

  @Tedd404 

 

please take a look to the original post. there you can find a picture and what I like to do.

It is simply to connect a NAS device on one of the Ports L2 and setup a second network. 

I can ping the NAS but don't have access to the internet from the NAS. Any documentation I can find ist using a manged switch which I don't have.

How to create multi networks and manage network behavior with ACL on Omada Gateway in standalone mode

 

If you don't have a managed switch, then this dummy switch you use will only pass one VLAN as untagged if you need computers on it(because computers use untagged VLAN). Or the switch can pass multiple tagged VLANs but will require connected devices tagged VLAN capable.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 570

Replies: 3

Related Articles