Problemas para conecta EAP620 HD
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No puedo conectar el EAP620 HD lo resetee conectado al transformador y reinicia con la luz azul que parpadea cada lapsos de tiempo
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @DiegoCarle,
Please use your phone connect or laptop to connect to the EAP’s Wi-Fi. If you can not find the WiFi or can not remember the password, you may reset the EAP and set it up again.
How to reset: please press the reset button on the EAP for 4 seconds and make sure the LED light changes, EAP's WiFi name will back to the default one tplink_5G and without a password.
Now use the phone to connect to the default WiFi and if you can see the error message “Obtain IP address fails”, or the phone can connect it but the IP address is 169.254.x.x. It is because the connection between the router and EAP fails. Please check the physical connection from the router to the EAP. If you are not sure, please use a PC to replace the EAP, connecting with the same Ethernet port and cable to check the PC can get internet or not.
If you can connect to the EAP’s Wi-Fi but no internet, please check the IP address on the phone or PC.
How to find IP address of Android smartphone/iPhone/iPad
If you can get a valid IP address, please do the Ping test on the PC, we need to Ping the router’s LAN IP, ping the 8.8.8.8 to check the connectivity.
Here is the instruction for the Ping test.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 238
Replies: 1
Voters 0
No one has voted for it yet.